FREE DELIVERY
Key Features
-
Single-spool filament drying capacity
-
45–75°C adjustable drying temperature
-
Advanced PTC heating technology
-
360° hot-air circulation
-
Second-generation temperature and humidity sensor
-
Real-time temperature and humidity monitoring
-
1–48 hour adjustable drying timer
-
Intelligent filament drying presets
-
Touchscreen control
-
Print directly from the dryer
-
Power-loss memory function
-
Compatible with 1.75mm and 2.85mm filament
-
Supports spools up to 190mm in diameter and 68mm wide
-
Compact desktop design
-
Suitable for a wide range of 3D printing materials
Specifications are supported by South African listings for Creality product code 4005010125.
Many 3D printing materials are hygroscopic, meaning they absorb moisture from the surrounding air.
When moisture-contaminated filament enters the hotend, absorbed water can turn into steam and interfere with extrusion.
This can cause excessive stringing, popping or crackling, bubbles, rough surfaces, inconsistent extrusion and reduced print quality.
The Space Pi V2 helps remove absorbed moisture through controlled heating and air circulation, allowing filament to print more consistently.
Advanced PTC Heating Technology
The Space Pi V2 uses a 145W PTC heating system to warm the drying chamber.
PTC heating provides controlled heat output, helping the dryer maintain the selected temperature throughout the drying cycle.
This makes it particularly useful for preparing moisture-sensitive filament before printing.
360° Hot-Air Circulation
The built-in circulation system distributes warm air around the filament spool.
This helps reduce uneven heating and promotes more consistent drying.
The system is particularly useful when preparing filament for long print jobs where consistent extrusion is important.
Higher Drying Temperature – Up to 75°C
The V2 offers an increased maximum drying temperature compared with the original Space Pi.
| Feature | Original Space Pi | Space Pi V2 |
|---|---|---|
| Spool Capacity | 1 | 1 |
| Temperature Range | 45–70°C | 45–75°C |
| Heating Technology | PTC | PTC |
| Air Circulation | 360° | 360° |
| Temperature & Humidity Monitoring | Yes | Updated sensor |
| Drying Timer | Up to 48 hours | Up to 48 hours |
| Print While Drying | Yes | Yes |
The increased temperature range provides additional flexibility for compatible materials, although some engineering filaments require drying temperatures above 75°C.
The Space Pi V2 features an updated temperature and humidity monitoring system.
The display allows users to observe the conditions inside the drying chamber and monitor the selected drying cycle.
The humidity reading reflects conditions inside the dryer and should not be interpreted as a direct measurement of moisture within the filament itself.
Intelligent Filament Presets
The Space Pi V2 provides convenient preset drying settings for commonly used filament types.
This reduces guesswork and makes it easier for users to select an appropriate starting temperature and drying duration.
Always follow the filament manufacturer’s specific drying recommendations when available.
Print While Drying
One of the most useful features of the Space Pi V2 is the ability to feed filament directly from the dryer into a compatible 3D printer.
This is especially beneficial when printing moisture-sensitive materials over extended periods.
It helps reduce the amount of time filament is exposed to humid room air before entering the extruder.
Recommended Filament Applications
| Material | Typical Drying Guidance |
|---|---|
| PLA / PLA+ | Approximately 45–50°C |
| PETG | Approximately 55–65°C |
| TPU | Approximately 45–60°C |
| ABS | Approximately 65–70°C |
| ASA | Approximately 65–70°C |
| Nylon / PA | Depends on formulation; some require higher temperatures |
| PC | Many grades require temperatures above 75°C |
These are general starting ranges, not guaranteed settings for every brand or formulation. Always confirm the filament and spool temperature limits before drying.
Suitable for Home & Professional Use
The compact single-spool design makes the Space Pi V2 useful for:
-
Home 3D printing
-
Schools and educational institutions
-
Makerspaces
-
Professional workshops
-
Print farms
-
Product development
-
Functional prototyping
-
Regular PETG and TPU printing
-
Filament preparation before long print jobs
Technical Specifications
| Specification | Details |
|---|---|
| Brand | Creality |
| Model | Space Pi V2 |
| Product Type | Single Filament Dryer |
| Product Code | 4005010125 |
| Spool Capacity | 1 |
| Temperature Range | 45–75°C |
| Drying Timer | 1–48 Hours |
| Heating System | PTC Hot-Air Heating |
| Rated Power | 145W |
| Air Circulation | 360° |
| Temperature Monitoring | Yes |
| Humidity Monitoring | Yes |
| Filament Diameter | 1.75mm / 2.85mm |
| Maximum Spool Diameter | 190mm |
| Maximum Spool Width | 68mm |
| Dimensions | Approximately 390 × 100 × 279mm |
| Net Weight | Approximately 1.5kg |
| Input Power | 220–240V AC, 50/60Hz |
| Power-Loss Memory | Yes |
| Print While Drying | Yes |
The Creality Space Pi V2 is a standalone filament dryer suitable for use alongside most FDM/FFF 3D printers.
Compatible printer families include Creality Ender, K1, K2, SPARKX and Hi models, as well as suitable Bambu Lab and other FDM/FFF printers.
It does not require a proprietary electronic connection to the printer.
When feeding directly from the dryer, ensure that the filament path is smooth and does not create excessive drag.
Why Choose the Creality Space Pi V2?
The Space Pi V2 provides an effective solution for customers who want to improve filament condition and reduce moisture-related printing problems.
Its combination of 75°C maximum drying temperature, intelligent monitoring, 360° circulation, touchscreen control and print-through capability makes it particularly useful for everyday filament management.
It is an excellent choice for customers who regularly print PETG, TPU and other moisture-sensitive materials but do not require a larger two- or four-spool dryer.
What’s Included
-
1 × Creality Space Pi V2 Single Filament Dryer
-
Standard manufacturer-supplied power accessories
-
User documentation
Reviews
There are no reviews yet.