FREE PUDO LOCKER DELIVERY!
Key Features
- Specialised foamed PLA formulation
- Micro-foaming technology
- Approximately 35% lighter than standard PLA
- Approximate density of 0.8g/cm³
- Adjustable foaming behaviour
- Designed specifically for lightweight models
- Excellent for RC aircraft
- Reduced material consumption for equivalent model volume
- Good surface finish
- Easy to paint and finish
- White finish ideal for custom painting
- 1.75mm filament diameter
- 1kg net filament weight
- Genuine Creality filament
Approximately 35% Lighter Than Standard PLA
The major advantage of Hyper Lightweight PLA is its significantly reduced density.
Creality specifies an approximate density of 0.8g/cm³, compared with approximately 1.25g/cm³ for conventional PLA formulations.
This allows large-volume models to be produced at considerably lower finished weights.
That can be especially valuable for:
- RC aeroplanes
- Wings
- Fuselages
- Drone components
- Lightweight structures
- Scale models
- Prototypes
- Large display models
Designed for RC Aircraft
Creality specifically developed Hyper Lightweight PLA with RC models and aircraft in mind.
Reducing the weight of printed aircraft components can improve:
- Overall aircraft weight
- Flight efficiency
- Lift-to-weight performance
- Payload flexibility
- Model performance
Large components such as wings and fuselage sections can particularly benefit from the reduced material density.
Micro-Foaming Technology
Hyper Lightweight PLA behaves differently from ordinary PLA.
During extrusion, the material foams and expands, allowing the printed extrusion to occupy more volume while using less material.
Creality states that the foaming effect can allow up to 50% less filament to be used for the same model volume, depending on the printing conditions.
This means a 1kg spool can potentially produce considerably more printed volume than a 1kg spool of conventional PLA.
Adjustable Foaming & Density
The amount of foaming can be influenced by the printing conditions.
Creality indicates that the foaming rate can be adjusted through printing temperature, allowing users to tune the balance between:
- Weight
- Density
- Strength
- Surface finish
In general, increasing the foaming effect produces a lighter printed part, while reducing the foaming effect can provide a denser result.
This makes the material particularly interesting for advanced users who want to optimise individual parts according to their function.
White Finish – Excellent for Painting
The White variation is particularly useful for RC aircraft and scale models that will be painted after printing.
The neutral base provides an excellent starting point for:
- Custom aircraft liveries
- Scale models
- Props
- Decorative finishing
- Prototype painting
- Airbrushing
- Custom branding
Creality also specifically promotes the material as being easy to paint.
Not the Same as Standard PLA
Because Hyper Lightweight PLA expands during extrusion, it should not simply be treated as ordinary PLA.
Users may need to optimise:
- Printing temperature
- Flow rate
- Extrusion multiplier
- Wall count
- Infill
- Retraction
- Layer height
- Print speed
Some experimentation is recommended when minimum weight is important.
Hyper Lightweight PLA vs Standard PLA
| Feature | Hyper Lightweight PLA | Standard PLA |
|---|---|---|
| Material Type | Foamed PLA | Solid PLA |
| Approx. Density | ~0.8g/cm³ | ~1.25g/cm³ |
| Finished Part Weight | Significantly Lower | Standard |
| Foaming During Printing | Yes | No |
| Adjustable Density | Yes | No |
| Material Usage by Volume | Lower | Standard |
| RC Aircraft | Excellent | Good |
| Weight-Sensitive Models | Excellent | Moderate |
| General Everyday Printing | Good | Excellent |
The key reason to choose Hyper Lightweight PLA is weight reduction, rather than simply replacing conventional PLA.
Ideal for RC Aircraft
Typical applications include:
- RC aeroplane fuselages
- Wings
- Tail sections
- Aircraft body panels
- Lightweight structural components
- Scale aircraft
- Experimental aerodynamic models
For large printed aircraft, even relatively small reductions in material density can significantly reduce the total finished weight.
Other Applications
Hyper Lightweight PLA is also useful for:
- Drone components
- Lightweight prototypes
- Educational models
- Large display models
- Scale models
- Miniatures
- Props
- Portable models
- Weight-sensitive structures
Keep Your Filament Dry
As with other PLA-based materials, proper storage helps maintain reliable printing performance.
Store the filament in a:
- Sealed filament container
- Dry box
- Vacuum bag with desiccant
Moisture can negatively affect extrusion consistency, surface quality and foaming behaviour.
Ideal For
Creality Hyper Lightweight PLA is ideal for:
- RC aircraft
- Model aeroplanes
- Wings and fuselages
- Drone projects
- Lightweight structures
- Scale models
- Educational projects
- Lightweight prototypes
- Miniatures
- Props
- Display models
- Weight-sensitive components
Technical Specifications
| Specification | Details |
|---|---|
| Brand | Creality |
| Range | Hyper Lightweight PLA |
| Material | Foamed PLA |
| Colour | White |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Approx. Density | ~0.8g/cm³ |
| Approx. Weight Reduction | ~35% vs Standard PLA |
| Foaming Technology | Yes |
| Adjustable Foaming Rate | Yes |
| Printer Technology | FDM / FFF |
| Primary Application | Lightweight / RC Models |
| Creality Item Number | 3301010555 |
Compatible Printers
Creality Hyper Lightweight PLA uses standard 1.75mm filament and can be used with suitable FDM/FFF printers, including many models from:
- Creality K1 Series
- Creality K2 Series
- Creality Ender Series
- Creality SPARKX Series
- Creality Hi Series
- Other suitable 1.75mm FDM/FFF printers
Because this is a foaming filament, a dedicated or customised slicer profile may be required to achieve the desired expansion, density and mechanical performance.
Why Choose Creality Hyper Lightweight PLA?
This isn’t simply another PLA filament. It is designed specifically for situations where every gram matters.
Its combination of:
- Micro-foaming technology
- Approximately 35% lower density
- Adjustable foaming behaviour
- Reduced material consumption
- Lightweight finished parts
- RC aircraft optimisation
- Easy painting and finishing
makes it particularly useful for RC aircraft, drones, scale models and other weight-sensitive projects.
The White variation is especially attractive for models that will be painted, airbrushed or customised after printing.









Reviews
There are no reviews yet.