FREE DELIVERY
Key Features
-
Dual-spool capacity – dries two compatible filament rolls simultaneously
-
Up to 75°C drying temperature – increased from 70°C on the original Space Pi Plus
-
Improved 360° hot-air circulation with redesigned internal airflow
-
Second-generation smart temperature and humidity sensor
-
Intelligent filament drying presets
-
Touchscreen control
-
Adjustable drying timer up to 48 hours
-
Print while drying – feed filament directly to compatible 3D printers
-
PTC hot-air heating system
-
Suitable for PLA, PETG, TPU, ABS, ASA and selected engineering filaments
-
Supports compatible 1.75mm and 2.85mm filament
-
Ideal for everyday printing, workshops and print farms
Creality confirms the V2 Plus’s 75°C maximum, improved air-duct design, second-generation sensor and smart presets.
What’s New in the Space Pi V2 Plus?
The V2 Plus introduces improvements over the original Space Pi Plus, particularly in drying temperature and airflow management.
| Feature | Original Space Pi Plus | Space Pi V2 Plus |
|---|---|---|
| Spool capacity | 2 rolls | 2 rolls |
| Maximum drying temperature | 70°C | 75°C |
| Heating system | PTC hot-air | Updated PTC hot-air |
| Air circulation | 360° | Improved 360° |
| Humidity/temperature sensor | Original generation | Second-generation |
| Filament presets | Yes | Smart presets |
| Touchscreen | Yes | Yes |
| Maximum drying time | 48 hours | 48 hours |
The original Plus specifications are documented by Creality, while the newer V2 features are identified in its updated product information.
Why Is Filament Drying Important?
Many 3D printing materials absorb moisture from the surrounding air.
Even filament that looks perfectly normal can contain enough moisture to negatively affect printing performance.
Common symptoms include excessive stringing, popping or crackling during extrusion, bubbles, rough surfaces and inconsistent extrusion.
The Space Pi V2 Plus uses controlled heating and air circulation to help remove absorbed moisture and restore more consistent printing behaviour.
Dry Two Filament Rolls Simultaneously
The dual-spool design allows two compatible filament rolls to be dried during the same cycle.
This is especially useful for customers who regularly work with different filament types, run multiple printers or want to prepare their next spool while printing.
Both spools share the same drying environment, so materials requiring different temperatures should be dried in separate cycles.
Higher Drying Temperature – Up to 75°C
One of the most important improvements is the increase in maximum drying temperature from 70°C to 75°C.
This provides additional flexibility for moisture-sensitive materials, including selected engineering filaments.
However, some PA-CF, PPA-CF and PC formulations require drying temperatures above 75°C. Always follow the filament manufacturer’s instructions rather than assuming the dryer can handle every engineering material.
Improved 360° Hot-Air Circulation
The updated air-duct design helps distribute heated air around the filament spools.
More consistent airflow supports effective drying throughout the chamber and helps reduce uneven heating.
This is particularly useful for larger spools and extended drying cycles.
Second-Generation Smart Sensor
The updated temperature and humidity monitoring system allows users to keep track of conditions inside the drying chamber.
This helps users monitor the drying process and select suitable settings for their filament.
The displayed humidity represents conditions in the dryer, not a direct measurement of the filament’s internal moisture content.
Smart Filament Presets & Touchscreen Control
The Space Pi V2 Plus offers convenient touchscreen operation and material drying presets.
Users can select suitable drying conditions without having to manually determine every setting.
For specialised filament, the manufacturer’s recommended drying temperature and duration should take priority over generic presets.
Print While Drying
Filament can be routed from the dryer directly to a compatible 3D printer.
This is particularly useful for moisture-sensitive materials during long prints, helping reduce their exposure to humid room air.
The dryer can also be used to prepare filament before printing.
Recommended Drying Applications
| Filament | General drying guidance |
|---|---|
| PLA / PLA+ | Low-temperature drying |
| PETG | Moderate-temperature drying |
| TPU | Controlled drying; especially useful for moisture-sensitive grades |
| ABS / ASA | Moderate-temperature drying |
| PA / Nylon | Only grades whose required drying temperature is within 75°C |
| PC / Engineering composites | Check manufacturer’s temperature requirements |
Always confirm that both the filament and its spool can tolerate the selected temperature.
Ideal For
The Creality Space Pi V2 Plus is particularly useful for hobbyists, professional makers, schools, print farms and businesses that regularly work with moisture-sensitive filament.
It is also an excellent accessory for customers using PETG, TPU and engineering materials where consistent extrusion and reliable surface quality are important.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | Creality |
| Model | Space Pi V2 Plus |
| Model number | DB-04S |
| Product type | Dual Filament Dryer |
| Spool capacity | 2 |
| Drying temperature | 45–75°C |
| Drying timer | 1–48 hours |
| Rated power | 160W |
| Heating system | PTC hot-air |
| Air circulation | 360° |
| Sensor | Second-generation temperature/humidity |
| Display | LCD touchscreen |
| Filament presets | 12 |
| Supported filament diameter | 1.75mm / 2.85mm |
| Maximum spool diameter | 190mm |
| Maximum spool width | 150mm |
| Net weight | Approximately 1.9kg |
| Printer compatibility | Compatible FDM/FFF printers |
Detailed V2 Plus specifications cross-checked against the South African product listing and Creality’s product database.
The Space Pi V2 Plus can be used alongside most FDM/FFF 3D printers, including compatible models from Creality, Bambu Lab and other manufacturers.
It is a standalone filament dryer, so it does not require the printer to support a particular firmware or proprietary drying system.
When printing directly from the dryer, ensure the filament path is smooth and does not place excessive drag on the printer’s extruder.
Why Choose the Creality Space Pi V2 Plus?
The V2 Plus is a practical upgrade for customers who want higher drying temperatures, improved airflow and intelligent moisture monitoring without moving to a larger four-spool dryer.
Its combination of dual-spool capacity, 75°C maximum temperature, smart presets and print-through operation makes it particularly useful for everyday filament preparation and production environments.
What’s Included
-
1 × Creality Space Pi V2 Plus Dual Filament Dryer
-
Standard manufacturer-supplied power and connection accessories
-
User documentation





Reviews
There are no reviews yet.